DESIGN AND FABRICATION OF YAM POUNDING MACHINE


DESIGN AND FABRICATION OF YAM POUNDING MACHINE  

ABSTRACT

The aim of this research work is based on the design and development of a motorized yam pounder for pounding yam. This research was considered because of the importance of pounded yam in Africa particularly in Nigerian and because of the time and energy wasted using the traditional mortal and pestle method of yam pounding. The research work aimed at eliminating the labour involved in traditional method of pounding. Through this improvement, the possibility of food contaminating by sweating while pounding will be control. This project work sought to design a yam pounder that pounds yam right from the peeled cooked stage in a pounding bowl with the help of an electric motor that transmit power through rotary motion together with the help of shaft. The pounding blades function at the pestle. The machine is to be operated by electricity and it consists of shaft, electric motor, yam beaters or pounding blades, bowl and the frame. Metal Rod for shaft; 0.30mm, Angle Bar for Frame; 40O, Stainless Steel Sheet; 0.2mm, Flat Mild (Pan); 2mm (Thickness), Prime mover; 1horse power, Bolts and Nuts; M8, Belt; V-belt, V-35, Screws; Cap Screw.   Low cost materials were used so as to make the machine affordable for average. Nigerian homes, thereby improving the standard of living. In order to avoid food contamination stainless material were also incorporated for smooth and clean pounding before consumption.

TABLE OF CONTENTS

Title page i

Declaration ii

Dedication iii

Certification iv

Acknowledgements v

Abstract vi

Table of Contents vii

CHAPTER ONE

1.0 INTRODUCTION 1

1.1 Historical Background 2

1.1.1Major Cultivated Species 5

1.1.2 National Value 6

1.2 Problem Statement 7

1.3 Justification of Project 8

1.4 Aims and Objectives 9

CHAPTER TWO

2.0 LITERATURE REVIEW 10

2.1.1 Agronomic Characteristics of Yam 13

2.1.2 Nutritional Composition of Yam 14

2.1.3 Utilization and Processing of Yam 16

2.1.4 Yam Selection and Weighing 18

2.2 Types of Yam Pounding 19

2.2.1 Manual Pounding 20

2.2.2 Stirring and Blending Type Pounder 20

CHAPTER THREE

3.0 DESIGN ANALYSIS, CALCULATION, MATERIAL

SELECTION AND COST ANALYSIS 22

3.1 Design Analysis 23

3.1.1 Component/Part Design 23

3.1.2 Power Transmission 24

3.1.3 The Pulley 24

3.1.4 Belt Length and Tension 26

3.2 Design Calculation 28

3.2.1 Volume of Bowl 29

3.2.2 Mass of (Blade) Beater 30

3.2.3 Tangential Force on the Beater 31

3.2.4 Resisting Force on the Beater 33

3.2.5 Determination of the Crushing Force and

Power Requirement 34

3.2.6 Shaft Design 36

3.3 Material Selection 38

3.3.1 Bearing Design and Selection 39

3.3.2 Belt Selection 42

3.4 Cost Analysis 43

CHAPTER FOUR

4.0 FABRICATION AND TESTING 44

4.1 Manufacturing Processes 44

4.1.1 Tools used during the Construction 45

4.1.2 Operation carried out 47

4.1.3 The Frame 50

4.1.4 The Shaft 51

4.1.5 The Sitting 52

4.1.6 Assembly 52

4.1.7 Mode of Operation 54

4.2 Testing and Evaluation of Efficiency 55

4.2.1 Result and Discussion 55

4.2.2 Pounding Efficiency 57

CHAPTER FIVE

5.0 CONCLUSION AND RECOMMENDATIONS 58

5.1 Conclusion 58

5.2 Recommendations 59

References60

Appendices63

CHAPTER ONE

1.0 INTRODUCTION

Yam is another crop cultivated across Nigeria. It is a seasonal crop and very difficult to preserve as it tends to rot. Nearly all Nigerians consume yam on regular basis and in large quantities particularly the Yoruba tribe in Nigeria. Nature allows yam to form a bond when it pounded or beaten in a mortar, it is then consumed as a meal with a choice soup. Pounded yam is a staple food consumed by the indigenous process of pounding yam is very laborious. It requires physical pounding by one or more people.

Depending on the quantity in the mortar, in a bid to reduce the labour involved in yam pounding came the manufacturing of Herbert mixer, the Kenwood mixer and Hammer mill in early 1975. These intended yam pounders failed due to some limitations in their operational functions. The Herbert and Kenwood mixers had almost the same operational principle and they had been identified for poor pounding due to the flapping (moving up and down) of their stirrer or mixer which is keyed to the electric rotating shaft. In addition to the poor pounding of both pounders, the Herbert mixer was found to heat excessively and as a result, the machine has to be stopped intermittently for cooling purpose.

1.1 HISTORICAL BACKGROUND

Yam belongs to the class of carbohydrate type of food and had been one of the oldest recipes known to man. It has been a major food crop in many of the African/Caribbean’s countries  such as Ghana, Ethiopia, Benin Republic and Nigeria in particular. Also, in some other parts of the world like Brazil, India, Oceania and Latin American, yam is a major source of food.

The word “yam” was derived from the wolof word “nyam” which is a Portuguese name meaning “to taste”. Also, in other African language, it can mean “to eat” e.g. in Hausa “nyam”. This perennial herbaceous crop is of different species such as white yam (dioscorea-rotundata) yellow yam (dioscorea-Acayenensis), water yam (dioscorea alata) and trifoliate yam (dioscorea-dumentorum). The fruit of yam consists of a membranaceous, three-wing capsule. The yam family is mostly of the weak-stemmed vines with large, under ground food storage organs-tuber-rhizomes.

Yam has found its use in the preparation of steroid hormones by syntax synthesis of cortisone from yam extract. Also, its lower glycemic index than potatoes product accounts for its more sustainable energy and better protection against obesity and diabetes.

According to the food information network in 2008, it was estimated that the world production of yam in 1993 was at 28.1million tons in which 96% of this estimate was from the West Africa tropical regions and 71% from Nigeria. This figure was later reviewed in 1998 accounting for about 72.4% of the world total production of 29.6million tones. Also, according to the Federal Office of Statistics, Nigeria is the world largest producer of yams having the water yam (dioscorea alata) and the yellow yam (dioscorea rotumdata) as her most cultivated species of yam.

Yam, been one of the most sumptuous meals can be prepared in diverse ways. While the Yoruba tribe may prefer its dried, milled and then made into a slightly solid paste called “Amala”, the Igbos would prefer cutting the tuber into smaller blocks or bits, boiled and eaten in order to avoid the tedious nature of pounding the boiled yam which results to bond formation like the Nigeria locally prepared fufu. However, the process of meshing or beating something into pulp or powder with repeated heavy blows is known as pounding.

Yam has remained one of the most highly regarded food products in West Africa and particularly Nigeria as virtually all her ethnic groups feed on it; hence its close integration into socio-cultural, economy and religious aspect of life such as marriage where some tubers of yam are presented to the bride family in accordance to the customs of the people. Also, there is the new yam festival which marks the harvest and eating of the newly harvested yams and are also used as sacrificial and appreciation items.

However, the background of this study originated from the desire of a Nigerian family of four who spent majority of his career life in the United Kingdom (Bristol, England) in the medical field who came back home and needed to adopt to his home culture which he found pounded yam very sumptuous meal but the rigorous processes involved in the traditional method which he also observed to be unhygienic and the noisy effect of the process due to the number of strokes during pounding to be uncalled for.

1.1.1 MAJOR CULTIVATED SPECIES

Yam, a tropical crop in the genus Dioscorea, has as many as 600 species out of which six are economically important staple species. These are:

Dioscorea rotundata (white guinea yam), Dioscorea alata (yellow yam), Dioscorea bulbifera (aerial yam). Dioscorea esculent (Chinese yam) and Dioscorea dum etroum (trifoliarte yam). Out of these, Dioscorea rotundata (white yam) and Dioscorea alata (water yam) are the most common species in Nigeria. Yams are grown in the coastal region in rain forests, wood savanna and southern savanna habitats.

Yam is in the class of roots and tubers that is a staple of the Nigerian and West African diet, which provides some 200 calories of energy per capita daily. In Nigeria, in many yam producing areas, it is said that “yam is food and food is yam”. However, the production of yam in Nigeria is substantially short and cannot meet the growing demand at its present level of use. It also has an important social status in gatherings and religious functions, which is assessed by the size of yam holdings one possesses.

1.1.2 NATIONAL VALUE

Yams are primary agricultural commodities and major staple crops in Africa, where yam cultivation began 11,000 years ago. In West Africa they are major sources of income and have high cultural value. They are used in marriage ceremonies, and a festival is held annually to celebrate its harvest.

Consumers’ demand for yam is generally very high in this sub-region and yam cultivation is very profitable despite high production costs.

1.2 PROBLEM STATEMENT

The edible yams are root crop groom on a field scale for the tubers. They provide staple carbohydrate food in the yam zone of West Africa, where daily consumption is 0.5, 1.0kg yam need a great deal of labour for their cultivation and to prepare them for food and they are usually expensive to buy for normal human consumption, the field or peel, sometimes after partial boiling in West Africa, they are usually eaten as pounded yam which is prepared by peeling cut-up yam and boil before pounding them in a wooden mortal to produce a glutinous dough (pounded yam).

The chemical composition of yam tuber is as follows:

 Water 70%

Starch 25%

Sugar 1%

Protein 1.2%

1.3 JUSTIFICATION OF PROJECT

The most important justification of this project are as follows:

⦁ The machine is being operated electrically

⦁ Safety of the user comes first when constructing the machine

⦁ The operation is hygienic and the machine can be cleaned with water after used

⦁ Lubrication of the adjacent moving part is made possible through a channel to reduce frictional resistance

⦁ The need to improve the country’s economy for if the machine is produced in large number they could be exported thereby improving our foreign trade and hence, earning of more foreign exchange.

1.4 AIMS AND OBJECTIVS

The aims and objective of the project were:

⦁ To design and develop a mechanical device which with rotary motion of the beaters perform the pounding operation which will be more efficient, less time consuming, with less human effort and of a greater hygienic processing.

⦁ To make the beaters detachable for easy maintenance

.

DESIGN AND FABRICATION OF YAM POUNDING MACHINE



TYPE IN YOUR TOPIC AND CLICK SEARCH.






RESEARCHWAP.ORG

Researchwap.org is an online repository for free project topics and research materials, articles and custom writing of research works. We’re an online resource centre that provides a vast database for students to access numerous research project topics and materials. Researchwap.org guides and assist Postgraduate, Undergraduate and Final Year Students with well researched and quality project topics, topic ideas, research guides and project materials. We’re reliable and trustworthy, and we really understand what is called “time factor”, that is why we’ve simplified the process so that students can get their research projects ready on time. Our platform provides more educational services, such as hiring a writer, research analysis, and software for computer science research and we also seriously adhere to a timely delivery.

TESTIMONIES FROM OUR CLIENTS


Please feel free to carefully review some written and captured responses from our satisfied clients.

  • "Exceptionally outstanding. Highly recommend for all who wish to have effective and excellent project defence. Easily Accessable, Affordable, Effective and effective."

    Debby Henry George, Massachusetts Institute of Technology (MIT), Cambridge, USA.
  • "I saw this website on facebook page and I did not even bother since I was in a hurry to complete my project. But I am totally amazed that when I visited the website and saw the topic I was looking for and I decided to give a try and now I have received it within an hour after ordering the material. Am grateful guys!"

    Hilary Yusuf, United States International University Africa, Nairobi, Kenya.
  • "Researchwap.org is a website I recommend to all student and researchers within and outside the country. The web owners are doing great job and I appreciate them for that. Once again, thank you very much "researchwap.org" and God bless you and your business! ."

    Debby Henry George, Massachusetts Institute of Technology (MIT), Cambridge, USA.
  • "Great User Experience, Nice flows and Superb functionalities.The app is indeed a great tech innovation for greasing the wheels of final year, research and other pedagogical related project works. A trial would definitely convince you."

    Lamilare Valentine, Kwame Nkrumah University, Kumasi, Ghana.
  • "I love what you guys are doing, your material guided me well through my research. Thank you for helping me achieve academic success."

    Sampson, University of Nigeria, Nsukka.
  • "researchwap.com is God-sent! I got good grades in my seminar and project with the help of your service, thank you soooooo much."

    Cynthia, Akwa Ibom State University .
  • "Sorry, it was in my spam folder all along, I should have looked it up properly first. Please keep up the good work, your team is quite commited. Am grateful...I will certainly refer my friends too."

    Elizabeth, Obafemi Awolowo University
  • "Am happy the defense went well, thanks to your articles. I may not be able to express how grateful I am for all your assistance, but on my honour, I owe you guys a good number of referrals. Thank you once again."

    Ali Olanrewaju, Lagos State University.
  • "My Dear Researchwap, initially I never believed one can actually do honest business transactions with Nigerians online until i stumbled into your website. You have broken a new legacy of record as far as am concerned. Keep up the good work!"

    Willie Ekereobong, University of Port Harcourt.
  • "WOW, SO IT'S TRUE??!! I can't believe I got this quality work for just 3k...I thought it was scam ooo. I wouldn't mind if it goes for over 5k, its worth it. Thank you!"

    Theressa, Igbinedion University.
  • "I did not see my project topic on your website so I decided to call your customer care number, the attention I got was epic! I got help from the beginning to the end of my project in just 3 days, they even taught me how to defend my project and I got a 'B' at the end. Thank you so much researchwap.com, infact, I owe my graduating well today to you guys...."

    Joseph, Abia state Polytechnic.
  • "My friend told me about ResearchWap website, I doubted her until I saw her receive her full project in less than 15 miniutes, I tried mine too and got it same, right now, am telling everyone in my school about researchwap.com, no one has to suffer any more writing their project. Thank you for making life easy for me and my fellow students... Keep up the good work"

    Christiana, Landmark University .
  • "I wish I knew you guys when I wrote my first degree project, it took so much time and effort then. Now, with just a click of a button, I got my complete project in less than 15 minutes. You guys are too amazing!."

    Musa, Federal University of Technology Minna
  • "I was scared at first when I saw your website but I decided to risk my last 3k and surprisingly I got my complete project in my email box instantly. This is so nice!!!."

    Ali Obafemi, Ibrahim Badamasi Babangida University, Niger State.
  • To contribute to our success story, send us a feedback or please kindly call 2348037664978.
    Then your comment and contact will be published here also with your consent.

    Thank you for choosing researchwap.com.