FABRICATION OF METAL PANEL DOOR


FABRICATION OF METAL PANEL DOOR 

ABSTRACT

  This project report is based on the fabrication of a metal door. A metal door is a movable structure use to close off an entrance typically consisting of a panel that swings on hinges or slide or rotate. The metal door is more reliable and strong and much more have good looking appearance than the other doors like a wooden door, leather door. E.t.c.  The locally available material [e.g mild steel] of different shapes, forms and format were available indigenous technology without compromising the standard. The door constructed was subjected to different test and it was found efficient and has the strength to provide adequate security at an affordable price the metal door consists of the adequate frame unit the door consists of the frame unit, the panel, the bolt, the stopper as the major units.

Since privacy and security are major essential needs in their various homes and offices, etc. which thereby gives rise to the need for doors among other security devices. The ability to have access to a door of quality high long span at a low affordable price to an average Nigeria has been a problem.

TABLE OF CONTENTS

Title page                                         i

Certification                                        ii

Dedication                                         iii

Acknowledgement                                 vi

Nomenclature                                     v

Abstract                                         vi

Table of Contents                                     vii

CHAPTER ONE

INTRODUCTION

1.1    Preamble                                    1

1.2        Need for the Project                                           3

1.3    Aim and Objectives of these Project                    3

1.4     Literature review (history of the door)                    4   

CHAPTER TWO

ANALYSIS OF ALTERNATIVE DOORS AND CHOICE OF BEST ALTERNATIVE

Analysis of Alternative Doors and Choice of Best Alternative        6

2.1     Metal Panel Door                                7

2.2     Glass Metal Door                                7

2.3     Wooden Door                                7

2.4    Analysis and Alternative Doors and Materials for   Doors        8

2.5   Choice of Alternatives                             10

CHAPTER THREE

DESCRIPTION OF COMPONENTS OF DOOR PART AND WORKING PRINCIPLE

3.1    Description of Component Part’s of the Door            12

3.2     Working Principle                                14

CHAPTER FOUR

DESIGN CALCULATION FOR THE METAL PANEL DOOR

4.1     Derivation of Formulae                            15

4.2   Mass Calculation of the Components Part                16

4.3      Weight of the Metal Panel Door                     18

CHAPTER FIVE

FABRICATION DETAILS

5.1   Procedure for Selection of Materials                    19

5.2   Consideration for Material Selection                    21

5.3   General Tools/Machine Used                        24

5.4   Sequence of Operation                            26

5.4.1   Sequence of Operation                            26

5.4.2    Fabrication Details                            28

5.5     Method of Fabrication                            29

5.6     Personal Protective Equipment (Welding Accessories)         32

5.7       Estimation and Cost of the Materials                    32

5.8   Safety Precaution to be Taken                        34

5.9   Maintenance                                    35

5.10   Problem Encounter                                36

CHAPTER SIX

CONCLUSION AND RECOMMENDATION

6.1   Conclusion                                    37

6.2    Recommendations                                37

    References

CHAPTER ONE

INTRODUCTION

1.1        PREAMBLE

        A door is a movable structure used to close off an entrance typically consisting of a panel that swing on hinges or that slides or rotates. (www.Meskerdoor.com/panel-door htlm).

        In the past door were made of canes .wood and grass as a means of entrance exist for security at homes and properties. But this door did not give maximum protection for these lives and property [Wagner Donald, 1996].

        Doors made from grass or wood have a short life span, they get damage very quickly and they cannot withstand high degree of strain, hence not durable. Wooden door are very delicate if they are put in open place, as a result its part not ways when come in contact with water. They cannot also be used in places where there are termite because they could be destroy otherwise they have to be seasoned [Wagner Donald, 1996].

        Doors is universally in building of all kind it can be controlled (open and close) manually or automatically and it is usually constructed for security purpose.

Metal panel door are of various design which are as follows:

⦁    Flat sheet metal door

⦁    Glass metal door

⦁    Metal flush door

⦁    Metal panel door

       The metal panel door was made up of almost metal and it has different unit like frame (metal panel), panel (metal pipe and sheet metal), handle (metal bar); and hinges.

       The metal panel door constructed is divided into units these are:

1.    The panel unit.

2.     The frame unit.

3.     The handle unit.

4.     The hinges and latches.

1.2    NEED FOR THE PROJECT

         In construction of a building, the most essential aspect is entrance in which doors are used to give access from entering or leaving a building. The crave for the fabrication of this project (metal panel door) include the following:

i.    To allow ventilation and light into the room.

ii.    To act as barrier to noise.

iii.    To control the physical atmosphere within a space by enclosing.

iv.    To give maximum protection for lives and properties.

1.3     AIM AND OBJECTIVES OF THIS PROJECT

AIM

1. To fabricate a metal panel door

OBJECTIVES

The objectives include the following:

1.    To change the local method of door to modern design.

2.    To overcome the problem of short life span of the door.

3.    To reduce the risk of danger to human lives and properties which might occur with the use of modern or glass door?

4.    To produce decent, stronger and well constructed door.

5.    To exposed student to the used of some complex machine in the workshop.

6.    To practicalise the theoretical aspect of works that are being thought in the class

7.    To prevent spread of fire

8.    To make the student realized that they can bring new idea to engineering fabrication or develop on what they are been thought in engineering industries and get better in the world.

9.    To enable the student to know the type of door and how to construct a metal panel door.

1.4      LITERATURE REVIEW (HISTORY OF DOOR)

           Doors date back from the ancient Egyptian Era, there are painting which serve as historical records of or door architecture. The climate in Egypt was hot and dry enough, that there was not any fear of war print that the wood used for doors were just that, slaps of wood on hinges.

          Doors were invented as a means of providing security for lives and property through locking up. The oldest door in England can be found in west minister abbey. The earliest renaissance door in France are those of the cathedral of (St. sauveur at Aix [1503] returning to Italy).

          In most places due to change of temperature and humidity. Doors usually have to be framed. Others historical records of doors include king Solomon’s temple doors. They were made of olive wood, as many doors of the past. In India, there were ancient stone doors found. These had pivots on each end, which then fit into sockets. These doors swung open and sheet, similar to saloon doors of old west but not as quickly. The Greeks and Romans used many styles of doors: single, double, and folding.

      These doors are as well as many others found throughout Europe’s past, were made of bronze. This seemed to be going of today market can be made fro any material just found on earth, wood, plastic, metal, glass, paper, and even fabric. They usually serve the purpose of keeping something in and/or out.

CHAPTER TWO

ANALYSIS OF ALTERNATIVE DOORS AND CHOICE OF BEST ALTERNATIVE

Based on the improvement and urge, to increase man’s comfort Engineer’s in training learn design alternatives for making doors to meet up with the presence demand which give a long life span an adequate security,

In a household, there are different kinds of doors depending on their purpose. All doors are classified as either exterior or interior models. These two types are differentiated by their construction.

    An interior door is one found in side of a house, while exterior door exposed to outer element on at least one side. Interior doors are found in the bathroom, bed room, base room (as long it is not an outside entrance), closet. Exterior doors are generally the front and back doors there might be the door for the existing garage as well.

Metal door are of various designs which are as follows;

.    Metal panel door

.    Glass metal door

.   Wooden door

.

FABRICATION OF METAL PANEL DOOR



TYPE IN YOUR TOPIC AND CLICK SEARCH.






RESEARCHWAP.ORG

Researchwap.org is an online repository for free project topics and research materials, articles and custom writing of research works. We’re an online resource centre that provides a vast database for students to access numerous research project topics and materials. Researchwap.org guides and assist Postgraduate, Undergraduate and Final Year Students with well researched and quality project topics, topic ideas, research guides and project materials. We’re reliable and trustworthy, and we really understand what is called “time factor”, that is why we’ve simplified the process so that students can get their research projects ready on time. Our platform provides more educational services, such as hiring a writer, research analysis, and software for computer science research and we also seriously adhere to a timely delivery.

TESTIMONIES FROM OUR CLIENTS


Please feel free to carefully review some written and captured responses from our satisfied clients.

  • "Exceptionally outstanding. Highly recommend for all who wish to have effective and excellent project defence. Easily Accessable, Affordable, Effective and effective."

    Debby Henry George, Massachusetts Institute of Technology (MIT), Cambridge, USA.
  • "I saw this website on facebook page and I did not even bother since I was in a hurry to complete my project. But I am totally amazed that when I visited the website and saw the topic I was looking for and I decided to give a try and now I have received it within an hour after ordering the material. Am grateful guys!"

    Hilary Yusuf, United States International University Africa, Nairobi, Kenya.
  • "Researchwap.org is a website I recommend to all student and researchers within and outside the country. The web owners are doing great job and I appreciate them for that. Once again, thank you very much "researchwap.org" and God bless you and your business! ."

    Debby Henry George, Massachusetts Institute of Technology (MIT), Cambridge, USA.
  • "Great User Experience, Nice flows and Superb functionalities.The app is indeed a great tech innovation for greasing the wheels of final year, research and other pedagogical related project works. A trial would definitely convince you."

    Lamilare Valentine, Kwame Nkrumah University, Kumasi, Ghana.
  • "I love what you guys are doing, your material guided me well through my research. Thank you for helping me achieve academic success."

    Sampson, University of Nigeria, Nsukka.
  • "researchwap.com is God-sent! I got good grades in my seminar and project with the help of your service, thank you soooooo much."

    Cynthia, Akwa Ibom State University .
  • "Sorry, it was in my spam folder all along, I should have looked it up properly first. Please keep up the good work, your team is quite commited. Am grateful...I will certainly refer my friends too."

    Elizabeth, Obafemi Awolowo University
  • "Am happy the defense went well, thanks to your articles. I may not be able to express how grateful I am for all your assistance, but on my honour, I owe you guys a good number of referrals. Thank you once again."

    Ali Olanrewaju, Lagos State University.
  • "My Dear Researchwap, initially I never believed one can actually do honest business transactions with Nigerians online until i stumbled into your website. You have broken a new legacy of record as far as am concerned. Keep up the good work!"

    Willie Ekereobong, University of Port Harcourt.
  • "WOW, SO IT'S TRUE??!! I can't believe I got this quality work for just 3k...I thought it was scam ooo. I wouldn't mind if it goes for over 5k, its worth it. Thank you!"

    Theressa, Igbinedion University.
  • "I did not see my project topic on your website so I decided to call your customer care number, the attention I got was epic! I got help from the beginning to the end of my project in just 3 days, they even taught me how to defend my project and I got a 'B' at the end. Thank you so much researchwap.com, infact, I owe my graduating well today to you guys...."

    Joseph, Abia state Polytechnic.
  • "My friend told me about ResearchWap website, I doubted her until I saw her receive her full project in less than 15 miniutes, I tried mine too and got it same, right now, am telling everyone in my school about researchwap.com, no one has to suffer any more writing their project. Thank you for making life easy for me and my fellow students... Keep up the good work"

    Christiana, Landmark University .
  • "I wish I knew you guys when I wrote my first degree project, it took so much time and effort then. Now, with just a click of a button, I got my complete project in less than 15 minutes. You guys are too amazing!."

    Musa, Federal University of Technology Minna
  • "I was scared at first when I saw your website but I decided to risk my last 3k and surprisingly I got my complete project in my email box instantly. This is so nice!!!."

    Ali Obafemi, Ibrahim Badamasi Babangida University, Niger State.
  • To contribute to our success story, send us a feedback or please kindly call 2348037664978.
    Then your comment and contact will be published here also with your consent.

    Thank you for choosing researchwap.com.