As we all know the objective of any business venture is to maximize profit. Hence all the decisions with respect to new projects, acquisition of assets, raising capital, distributing dividends e.t.c  are studied for their impact on profits and profitability.

Profit maximization theory is based on profits and profits are a must for the survival of any business. Therefore, this research work focused on the effectiveness of profit maximization on Dangote Cement Plc as a case study.

The data used was gathered with the aid of a questionnaire and Chi-Square

(x2 ) method of data analysis was applied in analyzing the data.

Based on the findings, the research reviewed that profit maximization occurs with efficient and effective use of resources by the employees in an organization. It also brings to the fore an organizations Strengths, Weaknesses, Opportunities and Threats in an attempt to be relevant and meet customer needs.

It was also discovered that cost volume profit analysis is the technique that is being used at Dangote Cement Plc when planning for profit cost. Hence, it is recommended that Business owners and Organizations interested in maximizing profit must review their cost structure regularly, must be diligent in cutting frivolous cost and boost productivity amongst employees. Furthermore, they must ensure that they make adequate provisions for contingency funds to help control risks and external factors that could hinder the progress of the business.  



Title Page                                                                                  i

Certification                                                                              ii

Dedication                                                                                iii

Acknowledgement                                                                      iv

Abstract                                                                                   v

Table of Content                                                                        vi

CHAPTER ONE: Introduction

1.0     Background of the Study                                                  1

1.1     Statement of the Problem                                                  2

1.2     Objective of the Study                                                       3

1.3     Research Questions                                                          4

1.4     Statement of Hypothesis                                                   4

1.5     Significance of the Study                                                   5

1.6     Scope of the Study                                                           6

1.7     Limitation of the Study                                                     6

1.8     Organization of the Study                                                 6

1.9     Historical Background of Dangote Cement Industry            8

1.10   Definition of terms                                                            9

CHAPTER TWO: Literature Review

2.0     Introduction                                                                    13

2.1     Current Literature Review                                                 14

2.2     Meaning of Profit                                                              11

2.3     Types of Profit                                                                  16

2.4     Approaches to Profit Maximization                                     17

2.5     Theory of Profit                                                                18

2.6     Profit Maximization in Business                                        24

2.7     Limitation of Profit Maximization as an Objective in Business25

2.8     Importance of Profit                                                          27

2.9     Justification of Maximization in Business                          28


3.0     Introduction                                                                    31

3.1     Restatement of research Questions and Hypothesis            32

3.2     Research Design                                                              32

3.3     Characteristics of Study Population                                   33

3.4     Sampling Design and Population                                       33

3.5     Source of Data                                                                 35

3.6     Method of Data Collection                                                 35

3.7     Administration of Data Collection Schedule                        36

3.8     Procedure for Processing Data                                           36

3.9     Statistical Method                                                            37

3.10   Justification of Statistical Tool                                          37

3.11   Limitation of Methodology                                                 38

CHAPTER FOUR: Data Presentation Analysis and Interpretation

4.0     Introduction                                                                    39

4.1     Presentation of Respondents Bio-Data                               40

4.2     Presentation of Research Questions                                   43

4.3     Test of Hypothesis                                                            49

4.3.1  Statement of Hypothesis 1                                                49

4.3.2  Statement of Hypothesis 2                                                52

CHAPTER FIVE: Summary, Conclusion And Recommendation

5.0     Introduction                                                                    55

5.1     Summary                                                                        55

5.2     Conclusion                                                                     56

5.3     Recommendation                                                           57

Bibliography                                                                   59

Questionnaire                                                                61




 The ultimate goal of every firm in business is profit i.e. (Profit Maximization) and cost minimization in order to maximize shareholder wealth. Many industries today are facing problems due to the expansion through increases sales and the introduction of new product. Some on the other hand are facing problem of contraction owing to the introduction of substitute material.  It is vital that management should be in position to plan for these changing levels of activities.

Apart from the problem of contraction and expansion during economic depression, an enterprise may be faced with the alternative of closing down or selling it at a price below the total cost.

Hence profit planning and control becomes difficult as a result of product offered and the action of competitor. In order to solve the problem created by the above situation profit, planning, cost, and their behaviour at different separating level, one of the most important tools developed by accountants to assist management in meeting the challenges is cost volume profit analysis.

According to I.M Pandey the analytical technique used to study the behavior of profit in response to changes in volume, cost and price, is called “Cost volume profit analysis” It is  a device used to determine the usefulness of the profit planning process of the firm.

The entire field of profit planning has become associated with the cost volume profit relationship in organization. In micro-economics course, profit  maximization is frequently cited as the goal of the firm; Profit maximization stressed the efficient use of  capital resources but it is not specific with respect to the time frame over which profit are to be measured; Profit maximization function largely as a theoretic goal with  economist using it to prove how firms behave rationally to increase profit.

Unfortunately, it ignores many real-world complexities that financial management firms must deal everyday with. Two major factors not considered by the profit maximization are Uncertainty and timing.


The rising magnitude of the incessant profit or loss in Nigeria business organization over the year has become a thing of concern to managers; government, Policymakers, academia, entrepreneurs, financial analysis, economist and other stakeholders in the country’s economy. Various studies have been carried out to explain with empirical evidence, the factors driving profit and loss in business organization

The challenges facing most firms is numerous particularly during the period of economic depression or recession characterized by high liquidation of many companies, merger and acquisition, low technological powers, shortage of foreign exchange to buy needed raw material, high cost of production, erratic powers supply, high volume of imported goods and the advanced state of competition has affected drastically the maximization profit and cost maximization in most business organisation.

In a competitive world the key factors are cost price turnover and profit and these are factors which no business organization can ignore.

Management is faced with the problem of how to make effective and efficient use of their available scarce resources in order to achieve the objective of profit maximization. Most management and organization lack under-standing on the importance of cost minimization as an effective tool or technique that has help in the sustainability on most business organization. Most organization is faced with high cost of production which has led to inefficient utilization of the cost volume profit analysis technique.   


Profit planning and control are essential ingredients of every successful business in the world. The efficiency of management is measured by the amount of profit or loss in a given accounting year. The general objective of this study therefore will be;

1)           To find a way of making use of scarce resource in order to achieve profit maximization.

2)           To highlight the importance of profit using cost volume profit analysis over other forms of technique.

3)           To identify the problems encountered in the economy that leads to lack of practical application of profit maximization.

4)           To evaluate the extent to which the use of profit maximization on Dangote Cement Plc has been efficient.


1)           Does your organization use cost volume profit analysis as a tool for profit planning and control?

2)           Apart from cost volume profit analysis; what other techniques do you employ in the profit planning and control?

3)           What problems does Dangote Cement Plc encounter in the profit planning and control?

4)           In what ways specifically has the application of cost volume profit analysis helped the organization to achieve efficiency and effectiveness?


1.     HO:   Cost volume profit analysis as a tool for profit planning and control is  not used in Dangote Cement Plc.

        H1:   Cost volume profit analysis as a tool for profit planning and control in Dangote Cement Plc.

2.     HO:   The application of cost volume profit analysis has not helped Dangote Cement Plc to be efficient and effective in its operations.

        H1:   The application of cost volume profit analysis has helped Dangote Cement Plc to be efficient and effective in its operations.

3.     HO:   Dangote Cement Plc does not employ other techniques in  profit planning and control apart from cost volume profit analysis.

        H1:   Dangote Cement Plc employs other techniques in profit

        planning and control apart from cost volume profit analysis.


It is hoped that this study will be of importance to students (Accounting, Banking and Finance, Business Administration, Economics etc) staff and management of business organization, the individuals in banking profession and the shareholders of the companies.

The students are to be aware of the role played by profit maximization in business organization. Profit maximization is an essential tool in all business organization.

In a competitive world, the key factors are cost, price turnover and profit, and these are factors which no business organization can ignore. Therefore, the significance of the study is as follows:

How the study of profit maximization and cost minimization of Dangote Cement Plc knows how their profit margin is increasing over time.

2.     It is useful to student in schools since it will serve as a source of reference to them in the nearest future.

3.     It is useful to the state since it is used by government in making decision for improvement of the states.

4.     It is useful to the economy as a whole since it is used by policy makers to maximize profit in the economy.

5.     It is a basis for understanding, contribution, margin pricing, related short run decisions and transfer pricing.


This study is to analyze the effectiveness of profit maximization tool in business growth in Nigeria as a tool for profit planning and control in general but with particular reference to Dangote Cement Plc. This is with the view of finding out how the company, has been able to manage cost in order to maximize profit.


The study of the effectiveness of profit maximization as strategic tool in business growth in Nigeria using Dangote Cement Plc., Lagos State. In carrying out this study, I was faced with number of constraints some of which are:

FINANCE: Inadequacies of funds affected expenses on distribution and collection of questionnaires to respondent and from respondents; printing of questionnaires and other transport expenses in conducting the research.

TIME: There is need to observe lots of protocols in respects to levels of management before the collection soring that the primary data collected would be dependable to some extent, also the rationing of time so as to accommodate my other courses.

Nevertheless, these constraints were taken care of and with limited errors and variances. 


The study is presented in five chapters. The first chapter introduces the study and establishes the problem to be addressed in the study. The background, the scope as well as the significance of the study is also discussed. Chapter two explores the review of literature; the third chapter reviews the research methodology and theoretical framework to be used. The fourth chapter presents the result of the analysis data and trend of Dangote activities in Nigeria during the years under review; while chapter five presents the conclusion, summary and recommendation of the study.


Dangote Group of Companies was established in May 1981 as a trading business with, an initial focus on Cement, the group diversified overtime into a Conglomerate trading, salt, flour, sugar and fish. By the early 1990s, the Group had given into one of the largest trading conglomerate operating in the country.

In November 1992, Dangote Cement was incorporated on 4th, it was formally known as the Obajana Cement Plc and it was commissioned in 2003 as the largest cement plant in sub-Saharan Africa.

In comparison to local peers, Dangote Cement Plc significantly outplays other cement manufacturers, as it presently control about 57% of local manufacturing capacity, this is expected to rise even further to about 67% on completion of Ibese plant and Obajana’s 3rd and 4th by Q1.11 combining manufacturing (excluding BCC) and imports, Dangote Cement accounted for about 40% of total Cement supply as at 2009; overall market share rose to about 49% with the inclusion of BCC.

In line with Nigeria’s Millennium Development Goals, the huge deficit in infrastructure especially adequate housing and transportation – roads, rails and ports, present a major case for continuing growth in cement consumption in Nigeria over the next 10 years at least. Based on a broad base argument that cement demand is more likely to continue rising. In the medium to long term,

we assess in this report, the key scenario, undergirding our expectation for cement demand in Nigeria, and present our outlook for Dangote cement’s revenue and profitability in the near to long term.

The company was granted a pioneer status for a period of 3 years with effect from January 1st 2009. The company is therefore exempted from payment of income tax in respect of profit accruing from manufacturing and sales of cement during the period to December 1st 2011.


1.     BREAK EVEN POINT: This is the level of operations at which a business revenue and expired costs (expense) are exactly equal.

2.     BUSINESS: A commercial activity engaged in as a means of livelihood or profit, or an entity which engages in such activities. It is also the activity or the organized effort of an individual or a group of individuals making use of resources in the environment to provide and distribute goods and services at a profit.

3.     COST: Cost denotes the amount of money that a company spent on the creation of production of goods or services. It does not include the mark-up for profit; it is also total money time and resources associated with a purchase or activity.

4.     DIVIDEND: It is a taxable payment declared by a company’s board of directors and given to it’s shareholders out of the company’s current or retained earnings, usually quarterly. Dividends are usually given as cash (cash dividend), but they can also take the form of stock (stock dividend) or other property.

5.     EFFICIENCY: Efficiency is the comparison of what is actually produced or performed with what can be achieved with the same  consumption of resources (money, time, labour etc). It is an important factor in determination of productivity.

6.     INVESTMENTS: Is an asset or an item that is purchased with the hope that it will generate income or appreciate in the future. In economic sense, an investment is the purchase of goods that are not consumed today but are used in the future to create wealth. In finance, an investment is a monetary asset purchased with the idea that the asset will provide income in the future or appreciate and be sold at a higher price.

7.     MARKET: Market is a regular gathering of people for the purchase and sale of provisions, livestock, and other commodities. It is actual or normal place where forces of demand and supply operate, and where buyers and sellers interact (direct or through intermediaries) to trade goods, services, or contracts of instrument, for money or barter.

8.     ORGANISATION: Is an elements or process of management concerned with the growth or change of the structure. It is a process of dividing and accountability within and external to the sections, the whole being coordinated to achieve the overall objectives.

9.     PRODUCTS: Product is an article or substance that is manufactured or refined for sale. It is also a good or services that most closely meets the requirement of a particular market and yields enough profit to justify its continued existence.

10.   PROFIT: The surplus remaining after total costs are deducted from total revenue, and the basis on which tax is computed and dividend is paid. It is the best known measure of success in an enterprise.

11.   PROFIT MARGIN: The amount by which revenue from sales exceeds costs in a business. It is also a ratio of profitability calculated as net income divided by revenues or net profits divided by sales.

12.   RESOURCES: Resource is an economic or productive factor required to accomplish an activity, or as means to under take an enterprise and achieve desired outcome. Three most basic resources include land,labour and capital; other resources include; energy, entrepreneurship, information, expertise, management and time.

13.   SALE MIX: This can be defined as the relative proportions in which a company’s products are sold. The idea is to achieve the combination or mix that will yield the greatest amount of profits.

14.   SHORT RUN: This is a period during which the quantity of at least one input is filled and the quantity of the other input can be varied.

15.   TRANSFER PRICING: This is the rate of prices that are utilized when selling goods or services between divisions.




RESEARCHWAP.ORG is an online repository for free project topics and research materials, articles and custom writing of research works. We’re an online resource centre that provides a vast database for students to access numerous research project topics and materials. guides and assist Postgraduate, Undergraduate and Final Year Students with well researched and quality project topics, topic ideas, research guides and project materials. We’re reliable and trustworthy, and we really understand what is called “time factor”, that is why we’ve simplified the process so that students can get their research projects ready on time. Our platform provides more educational services, such as hiring a writer, research analysis, and software for computer science research and we also seriously adhere to a timely delivery.


Please feel free to carefully review some written and captured responses from our satisfied clients.

  • "Exceptionally outstanding. Highly recommend for all who wish to have effective and excellent project defence. Easily Accessable, Affordable, Effective and effective."

    Debby Henry George, Massachusetts Institute of Technology (MIT), Cambridge, USA.
  • "I saw this website on facebook page and I did not even bother since I was in a hurry to complete my project. But I am totally amazed that when I visited the website and saw the topic I was looking for and I decided to give a try and now I have received it within an hour after ordering the material. Am grateful guys!"

    Hilary Yusuf, United States International University Africa, Nairobi, Kenya.
  • " is a website I recommend to all student and researchers within and outside the country. The web owners are doing great job and I appreciate them for that. Once again, thank you very much "" and God bless you and your business! ."

    Debby Henry George, Massachusetts Institute of Technology (MIT), Cambridge, USA.
  • "Great User Experience, Nice flows and Superb functionalities.The app is indeed a great tech innovation for greasing the wheels of final year, research and other pedagogical related project works. A trial would definitely convince you."

    Lamilare Valentine, Kwame Nkrumah University, Kumasi, Ghana.
  • "I love what you guys are doing, your material guided me well through my research. Thank you for helping me achieve academic success."

    Sampson, University of Nigeria, Nsukka.
  • " is God-sent! I got good grades in my seminar and project with the help of your service, thank you soooooo much."

    Cynthia, Akwa Ibom State University .
  • "Sorry, it was in my spam folder all along, I should have looked it up properly first. Please keep up the good work, your team is quite commited. Am grateful...I will certainly refer my friends too."

    Elizabeth, Obafemi Awolowo University
  • "Am happy the defense went well, thanks to your articles. I may not be able to express how grateful I am for all your assistance, but on my honour, I owe you guys a good number of referrals. Thank you once again."

    Ali Olanrewaju, Lagos State University.
  • "My Dear Researchwap, initially I never believed one can actually do honest business transactions with Nigerians online until i stumbled into your website. You have broken a new legacy of record as far as am concerned. Keep up the good work!"

    Willie Ekereobong, University of Port Harcourt.
  • "WOW, SO IT'S TRUE??!! I can't believe I got this quality work for just 3k...I thought it was scam ooo. I wouldn't mind if it goes for over 5k, its worth it. Thank you!"

    Theressa, Igbinedion University.
  • "I did not see my project topic on your website so I decided to call your customer care number, the attention I got was epic! I got help from the beginning to the end of my project in just 3 days, they even taught me how to defend my project and I got a 'B' at the end. Thank you so much, infact, I owe my graduating well today to you guys...."

    Joseph, Abia state Polytechnic.
  • "My friend told me about ResearchWap website, I doubted her until I saw her receive her full project in less than 15 miniutes, I tried mine too and got it same, right now, am telling everyone in my school about, no one has to suffer any more writing their project. Thank you for making life easy for me and my fellow students... Keep up the good work"

    Christiana, Landmark University .
  • "I wish I knew you guys when I wrote my first degree project, it took so much time and effort then. Now, with just a click of a button, I got my complete project in less than 15 minutes. You guys are too amazing!."

    Musa, Federal University of Technology Minna
  • "I was scared at first when I saw your website but I decided to risk my last 3k and surprisingly I got my complete project in my email box instantly. This is so nice!!!."

    Ali Obafemi, Ibrahim Badamasi Babangida University, Niger State.
  • To contribute to our success story, send us a feedback or please kindly call 2348037664978.
    Then your comment and contact will be published here also with your consent.

    Thank you for choosing